Subsea Accumulator Module
Deep Down’s Subsea Accumulator Module (SAM) is designed to provide customers with a multi-faceted subsea tool to address cathodic protection (CP) and provide a subsea reservoir. Consisting of a Subsea Deployment Basket (SDB), built-in steel flying lead, J-plate, and Remote Operated Vehicle (ROV) panel, the SAM has a compact design that allows for rapid transport without the need for permits.
The SAM is pre-charged with pressurized control fluid enabling plug-n-play subsea accumulation capabilities to augment the existing subsea distribution control system with localized volume and pressure control features. An ROV can guide the steel flying lead from the SAM and connect it to a hydraulic connection panel. Additionally, a funnel serves as a protective cage for product when in the stowed mode, and integrates flying CP grounding cable with clamp that is ROV installable to provide additional CP protection to subsea structures. The SAM can carry additional anodes based on customer requirements.
- During shipping: 8′ x 8′ x 8′
- During installation: 12′ x 12′ x 8′
- During spooling: 13.5′ x 13.5′ x 8′
- Length of flying lead: 100′
- Height of valves on SAM from seafloor: Approximately 6′
Weight: Approximately 8700 lbs
Net uplift of Moray head: Approximately 25 lbs. (Maximum water depth 8200′)
- End Effecter: Class IV
- Torque: 215 ft/lbs (to mate)
- Turns: 11 turns
- End Effecter: Class II
- Torque: 150 ft/lb max (300 ft/lb damage)